Order by 3:00 PM Monday – Friday to receive your parcel the next day.
Orders placed after 3:00 PM ship the next working day on the same 24‑Hour service and usually arrive the following day.
See Full Delivery Information.
Overview
A slim 80cm solar bollard for modern paths, entrances and driveways. Its die-cast aluminium body, two tall monocrystalline solar panels and 5000mAh battery combine architectural styling with useful warm-white illumination.
Measured 155-lumen warm-white light at approximately 3000K
Three operating modes: motion boost, constant light or motion only
80cm rectangular aluminium body with a sand-textured black finish
Two 5.5W monocrystalline solar panels and a 5000mAh lithium battery
Bolt-down installation for a sound hard surface or concrete pad
Slim 15cm-wide profile for an uncluttered look beside paths and entrances
The Marlow stands 80cm high but is only 15cm wide, giving paths, entrances and contemporary landscaping a tall, uncluttered profile. Its die-cast aluminium and glass construction is more substantial than a typical plastic stake light.
✓ Warm-white illumination✓ PIR motion sensing✓ Three lighting programmes✓ Integrated solar panels✓ 80cm slim profile✓ Bolt-down installation
A supplier laboratory test measured approximately 155 lumens at 3000K. That makes it a warm-white pathway bollard for orientation and ambience rather than a floodlight.
Adaptable Pathway Lighting
The lighting programme and panel position work together to shape evening performance.
Three useful lighting behaviours
Select motion boost with a low background light, constant illumination after dark, or motion-only operation.
Motion modes conserve stored energy when a route is used only occasionally.
Two tall solar panels
A 5.5W monocrystalline glass panel is fitted to each side of the upper body.
Position both faces away from persistent shade so they can make the best use of the available daylight.
Stored Energy & Surface Mounting
The integrated battery supports evening use, while the bolt-down design needs a permanent base.
5000mAh stored energy
The internal 3.7V 5000mAh lithium battery is sized for the light's three operating programmes.
The manufacturer specifies 10–12 hours from a full charge under suitable conditions.
Permanent surface mounting
This is a bolt-down bollard for a sound, level hard surface or suitable concrete pad.
It is not supplied as a push-in ground-spike light.
Illustrative setting; brightness varies with conditions.
Realistic solar performance
The quoted 4–5 hour charging time assumes good direct sunlight. Actual runtime varies with panel position, shading, season, weather and the selected mode; winter performance will be lower than the full-charge maximum.
What is included
One Marlow solar bollard with its integrated panels and battery, plus two M6 × 60mm expansion bolts.
You will need: a suitable hard mounting base and installation tools. A concrete pad and tools are not included.
