Extension cable for Smart Garden solar fountains 1190010, 5m.
5 meter extension cable
Model number 1190010
Extends existing Smart Garden water feature cable
WILL IT FIT? Check the plug on your existing panel lead — that is the only thing that decides it.
✔ FITS: a round push-fit barrel plug (5.5mm DC jack). This is the older direct-solar Smart Garden design, broadly features bought before 2026.
✘ DOES NOT FIT: a threaded screw collar or a small single-pin plug. That is the newer design — Hybrid kits (SW1020D / SW1040D) and the 2026 kits (1260016-G / 1260028-G).
If yours is the newer type: Smart Garden do not make an extension cable for any of the new solar or hybrid water features, so there is no longer version to buy. Reposition the panel or the feature instead.
Not sure? Send us a photo of the plug on your panel lead and we will tell you which you have.
Use this extension cable when you need extra reach between your Smart Garden water feature components, so you can position the feature while keeping the existing lead run in place. It is intended for Smart Garden products and is designed to extend an existing Smart Garden water feature cable.
Product Overview
Extend Your Smart Garden Water Feature Cable
The 5m extension cable gives you greater flexibility when placing your water feature. It extends the length from power source to pump by 5 metres, allowing you to position the feature where you need it.
Smart Garden Products Only
Please note: these extension cables are for Smart Garden water feature products only and cannot be used with other products.
Compatibility — Please Check Before Ordering
This 5m extension cable fits older direct-solar Smart Garden water features with the original DC barrel connector — the same connector used on pumps such as SP-160XC3 and SP-160X3S.
This cable is NOT compatible with:
Hybrid models — SW1020D and SW1040D Solar Battery Hybrid kits (Kingsbury Hybrid and similar) use a different connector
New 2026 Smart Garden kits — 1260016-G (1.6W Twin Glass Pump & Panel Kit) and 1260028-G (1.8W Glass Pump & Panel Kit) use an updated connector
Any water feature that doesn't use the DC barrel plug
If you're unsure, check the connector on your existing cable or contact us before ordering.
This is an extension cable that is plugged in between your existing power source and the pump. So it gives you greater flexibility for locating the feature
Will this five-metre lead fit my older Smart Garden solar fountain?
It fits older direct-solar Smart Garden water features that use the original round, push-fit DC barrel connector. The product information identifies the same connector as being used on pumps such as SP-160XC3 and SP-160X3S. Before ordering, compare the plug on your existing panel lead: a threaded collar or small single-pin connector indicates the newer design and is not compatible.
How do I install the extra five metres between the panel and pump?
Installation is described as straightforward: plug the lead between your existing power source and the pump. It adds five metres to the existing Smart Garden water feature cable, giving you more flexibility when positioning the feature while keeping the original lead run in place. It is intended to extend an existing Smart Garden cable rather than replace the complete cable arrangement.
Does it work with newer hybrid or 2026 Smart Garden fountain kits?
No. It uses the older Smart Garden connector and is not compatible with SW1020D or SW1040D hybrid kits, or with the 2026 kits 1260016-G and 1260028-G. The newer products use different connectors. It also cannot be used with a water feature that does not have the specified DC barrel plug, so inspect the existing connector before attempting a replacement.
Сonsultation
If you have questions, please ask, do not hesitate,we are always happy to help you