Order by 3:30 PM Monday – Friday to receive your parcel the next day.
Orders placed after 3:30 PM ship the next working day on the same 24‑Hour service and usually arrive the following day.
See Full Delivery Information.
Falcon 126 LED Solar Security Light – Super Bright Split Panel Design
Falcon 126 LED solar security light with split panel design, 5m cable, motion sensor, and 180° wide‑angle illumination.
✓ 126 Ultra-Bright LEDs✓ 180° Wide-Angle Illumination✓ 5m Split Solar Panel Cable✓ 3 Smart Modes✓ Up to 10m Detection Range✓ IP65 Weatherproof✓ Free 24 Hour UK Delivery On All Orders
Perfect for doorways, garden paths, garages, fences, and security zones, this low‑profile unit delivers 350 lumens of smart, reliable light in any UK weather.
Extra-Sensitive Detection – Reliable motion activation for driveways and garages, even in low-light conditions.
Next-Level Security Lighting – Advanced Features
Engineered for demanding homeowners, the Falcon 126 LED employs a three-mode intelligent lighting system, advanced PIR motion detection, and split-panel solar charging. Whether you need powerful security lighting, safe passage illumination, or all-night accent lighting, it adapts to your needs at the push of a button.
Unmatched Brightness
Perfect for entrances, sheds, and wide garden zones.
Customize placement and lighting—mount the Falcon’s weatherproof light unit exactly where you need it, while positioning the split panel for maximum sun exposure (up to 5 meters away). Enjoy worry-free security and visibility for entrances, pathways, garages, sheds, or remote garden areas, without electrical wiring.
Three Lighting Modes – Motion‑only, always‑on, and dim‑to‑bright, set via rear silicon control button.
Flexible Mounting & Easy Setup
Simply fix the light and solar panel in your desired locations with basic tools. The extra-long 5m cable lets you position the panel for optimal sunlight—even in shaded or awkward spaces.
Optimal Placement
Perfect for garages, sheds, driveways, alleyways, fences
Split design means panel and light don’t need to be adjacent
Mount above doors for wide-area coverage (180° spread)
Smart Modes
Mode 1: Motion activation, full brightness, auto-off
Follow this comprehensive guide to ensure optimal installation and performance of your outdoor motion light. Proper installation is crucial for maximum efficiency and longevity of your lighting solution.
Before You Begin
Start by preparing your chosen area and checking you have the right conditions and tools in place for a smooth installation.
Location Planning
Identify optimal position for maximum sunlight exposure
Ensure unobstructed solar panel placement
Consider seasonal sun patterns
Check mounting surface stability
Required Tools
Pencil for marking
Spirit level
Appropriate screwdriver
Cleaning materials
Safety Considerations
Ensure stable working platform
Check for hidden wiring
Verify wall material suitability
Prepare proper safety equipment
Installation Options
Choose the installation method that best suits your surface and setup—whether using fixings or a clean, quick adhesive mount.
Screw Mount Installation
Mark mounting points accurately
Pre-drill if necessary
Use supplied wall plugs
Secure mounting bracket firmly
Verify bracket is level
Adhesive Mount Installation
Clean surface thoroughly
Ensure surface is completely dry
Remove protective film
Apply firm, even pressure
Allow adhesive to cure fully
System Setup & Optimization
Once installed, you can tailor the system to your preferences and fine-tune performance for your specific environment.
Initial Configuration
Remove protective film from solar panel
Set operating mode as required
Adjust sensor sensitivity
Test motion detection range
Performance Optimization
Adjust light head angle
Fine-tune motion sensor
Test in various light conditions
Verify detection zones
Maintenance & Care
Simple, regular upkeep helps your light continue performing at its best through all seasons.
Regular Maintenance
Clean solar panel monthly
Check mounting security
Clear debris from sensors
Inspect weather seals
Seasonal Adjustments
Adjust angles for seasonal sun
Update timer settings
Check weather resistance
Optimize detection zones
Quick Troubleshooting Guide
If your light isn’t operating as expected, try these quick checks and fixes before seeking further support.
These solar powered lights are designed for easy, reliable outdoor lighting with minimal maintenance. Here’s how they work and what you need to know for best results year-round.
Daytime Charging
Solar panel collects sunlight and charges the internal battery during the day.
For best results, install the panel facing south (in the northern hemisphere), especially in winter when sunlight is limited.
Keep the panel clean and free from shade for maximum efficiency.
Automatic Night Operation
At dusk, the light automatically switches to standby mode.
Built-in motion sensor detects movement and activates the light when needed.
After a set time with no motion, the light returns to standby or turns off to save power.
Selectable Lighting Modes
Most models offer three modes, set by a button on the light or with a remote control:
Mode 1: Motion-activated full brightness, then off.
Mode 2: Dim light all night, full brightness with motion.
Wipe the panel regularly to remove dust and debris.
Check the light’s position seasonally to ensure good sun exposure.
Test and adjust the motion sensor range if needed.
With correct placement and occasional cleaning, your lights will provide years of convenient, automatic illumination—no wiring or manual switching required.
Looks super neat. Easy to fit. Throws a good light for a small unit. Nice to be able to direct it where you want it. Lasts well even when quite dull during the day.
