12V DC Deep Well Submersible Pump – Up to 1,000 LPH, 30m Lift
The 12V DC Deep Well Pump is a high-performance submersible solution for boreholes, wells, irrigation tanks, and remote water supply needs.
✓ Up to 1,000 LPH Flow✓ 30m Max Lift Height✓ Solar & Battery Ready✓ Durable Submersible Design✓ Simple, Safe Operation
Designed for solar and battery operation, this rugged pump delivers dependable water wherever you need it—off-grid, on farms, allotments, or as backup at home. Its robust, easy-to-install construction ensures long-term reliability in challenging locations.
Key Features
Engineered for deep well extraction and off-grid applications, this pump delivers reliable water supply with simple, eco-friendly 12V power.
High Performance
Up to 1,000 LPH flow at ground level
Maximum vertical lift: 30 metres
Consistent daily water delivery
Flexible Power Sources
Works with 12V solar panels (100W+ recommended)
Runs on deep cycle 12V batteries
Operates from regulated 12V DC power
Rugged, Long-Lasting Build
Stainless steel & plastic construction
IP-rated fully submersible body
Low-maintenance, durable motor
Efficient Water Lifting for Deep Wells
With a maximum lift of 30 metres, this pump draws water from wells and boreholes for use in irrigation, livestock, or remote supply. It’s suited for daily filling of tanks, troughs, or garden reservoirs, and operates efficiently from solar or battery energy with very low power consumption.
Adaptable for Off-Grid or Solar Systems
The pump is ready for off-grid independence: connect directly to a solar PV panel (100W+ recommended), use an existing 12V battery bank, or run from any suitable 12V DC power source for reliable performance in any environment.
Solar Operation
Optimized for 12V DC solar arrays
Ideal for remote/rural applications
Battery Backup
Compatible with all lead-acid or LiFePO4 batteries
Pumps at dusk or after sunset
Direct DC Supply
Runs from stable regulated 12V output
Easy integration in backup or test systems
Built for Reliability & Longevity
Engineered with corrosion-resistant stainless steel and protected electronics, this deep well pump stands up to demanding underground conditions. The waterproof body ensures continual operation even when submerged, and minimal maintenance means you can count on lasting performance.
Quality Materials
Stainless steel & high-grade plastic
Resistant to rust, corrosion & minerals
Submersible Protection
IP-rated for safe deep-well operation
Prevents water ingress
Safety Features
Optional dry-run protection on certain models*
Fuse recommended for voltage surges
Simple Setup & Operation
Installation is straightforward: lower the pump into your well or tank, connect your 16mm hose, and hook up to your 12V DC power supply. Lightweight and compact, it suits new and replacement installs alike.
Sustainable & Energy-Efficient
This pump is perfect for off-grid, solar-powered, and low-impact water solutions. Low power usage (80–120W) means longer battery life and efficient solar operation, helping reduce energy costs and environmental impact.
Typical Applications
Water Supply
Deep well & borehole pumping
Rural water supply solutions
Irrigation & Gardening
Topping up tanks for irrigation
Remote garden or greenhouse use
Livestock & Backup Use
Field/animal trough fill
Emergency or backup water extraction
Performance at Different Lift Heights
Estimated water flow at several vertical lifts using a 12V battery or equivalent solar source (figures are approximate, real-world conditions may vary):
Lift Height
Flow Rate (LPH)
0 m (Ground Level)
1,000
10 m
~850
20 m
~600
30 m (Max)
~300–400
Flow reduces as lift height increases. For maximum flow, use the shortest possible hose and minimize bends.
Pump Specifications & Solar Setup Guidance
Specification
Details
Maximum Flow Rate
1,000 LPH (16.6 L/min)
Maximum Lift Height
30 m (98 ft)
Rated Power Consumption
80–120W
Working Voltage
12V DC
Outlet Diameter
16mm
Material
Stainless steel, plastic
Cable Length
1 m
Certifications
CE (others may apply)
Power Source
12V battery, 12V solar, or regulated DC
Warranty
1 Year (confirm stock)
Solar Panel Advice:
For best results use a 12V solar panel (100W+).
A charge controller is recommended with battery setups.
Do not use panels above 15–16V; avoid “24V” panels to protect the pump.
Always fuse the system for safe operation.
Technical Excellence
The 12V DC Deep Well Submersible Pump combines efficient water lifting, robust design, easy installation, and compatibility with renewable power. It's the practical choice for sustainable, dependable water access—wherever you need it most.
Experience the Difference With PowerBee Ltd
Award-Winning Quality
Powerbee Ltd is a Best Buy Award Winner 2021-2025
16 Years of Solar Power Expertise
CE Certified Products
Professional Support Within 24 Hours
Customer Protection
30-Day Money-Back Guarantee
12-Month Standard Warranty
Free UK Mainland Shipping
Support Hotline: 07786948899
✓ 30-Day Money-Back Guarantee✓ Free UK Delivery✓ Powerbee : A Best Buy Award Winner 2021-25
Rate this product
0/5
0 Reviews
Please rate this product, describe its advantages and disadvantages, please share your impression about its use
Installation Guide & Safety Instructions – 12V Deep Well Pump
Complete guide for safe installation and operation of your 12V DC Deep Well Submersible Water Pump. Follow these steps to ensure optimal water delivery, reliability, and renewable power compatibility.
✓ Safety First✓ Solar & Battery Ready✓ Step-by-Step Guide✓ Deep Well Applications✓ Reliable Performance
Important Safety Information
⚠️ Essential Safety Precautions:
Disconnect power before handling or maintaining the pump
Never run the pump dry. Ensure it is fully submerged in water
Keep electrical connections out of the well and dry
Use waterproof and IP-rated connectors for all installations
Check voltage compatibility (12V DC only)
Install a circuit fuse for protection
Avoid lowering or pulling the pump by the power cable
Compatible Power Sources
This pump is designed for reliable operation with solar panels and 12V batteries, making it ideal for off-grid, rural, or backup water supply.
Solar Panels
Operates with 12V solar panels (minimum 100W recommended)
Use MPPT/DC controller for stable performance
Face panels south and adjust for seasonal sun angle
Battery Power
Works with 12V lead-acid or deep cycle batteries
Add fuse protection (10A recommended)
Recharge battery with solar panel or charger
Other DC Sources
12V DC generators or regulated power supplies
Use only with proper DC conversion and protection
Preparation & Planning
Well/Borehole Assessment
Measure well depth and water level
Ensure well diameter exceeds pump diameter (typically >65mm)
Inspect quality and cleanliness of well water
Power Setup Planning
Confirm your solar or battery system delivers 12V DC
Calculate daily run time needed & battery size for backup
Plan safe location for controllers or switches
Water Delivery Design
Determine lift distance (vertical height from pump to outlet)
Use compatible 16mm hose or pipe for delivery
Estimate total flow needed per day
Step-by-Step Installation
Pump Placement
Lower pump gently into well using a supporting rope
Do NOT lower by the power cable
Keep pump at least 1m below water surface and 1m above well bottom
Ensure pump is vertical for proper intake
Pipe & Cable Setup
Attach 16mm hose/pipe securely to outlet
Seal all hose connections to prevent leaks
Route power cable up and away from water as soon as possible
Electrical Connection
Connect to 12V solar or battery system via waterproof connectors
Use a fuse in the positive cable for safety
Avoid cable joins within the well casing
Recommended Applications
Off-Grid Water Supply
Remote homesteads, cabins, and field shelters
Garden irrigation in allotments or rural settings
Livestock troughs and watering systems
Borehole or Well Water Extraction
Pumping clean water from deep wells or boreholes
Backup water extraction for emergencies
Solar-Powered Systems
Solar irrigation for gardens and crops
Battery or hybrid off-grid water supply
Power Connection Tips
Solar Panel Setup
Face solar panels due south
Adjust for maximum sun exposure (30-45° angle)
Use quality MC4 connectors for outdoors
Consider using a controller for max efficiency
Battery Connection
Use appropriate gauge wiring for 10A+ loads
Include an inline fuse on the positive line
Check polarity before connecting
Switching & Control
Install manual switch or float switch for convenience
Keep control gear in dry, accessible locations
Maintenance Requirements
Routine Maintenance
Briefly run pump every 2–4 weeks if used seasonally
Flush system to clear potential debris/silt
Monitor water quality and intake clogging
System Checks
Inspect cable and connectors quarterly
Check for signs of water ingress or corrosion
Seasonal Shutdown
Remove pump from well in freezing conditions
Clean and store pump dry if not in use
Troubleshooting Guide
Pump Not Running
Check/replace fuse and verify power source voltage
Ensure battery or solar panel is charged
Inspect all wiring and connectors
Reduced Flow
Clean intake screen and check for blockages
Check for leaks or hose restrictions
Verify well water level is above pump
Intermittent or Short Cycling
Check for voltage drop/low battery
Inspect for wiring faults or loose connections
Examine for controller or float switch issues
Professional Installation Tips
Use a separate rope or wire for lowering/retrieving pump
Mount control/fuse box in dry weatherproof location
Use quality waterproof connectors and electrical tape
Install a non-return valve on the discharge line
Document and label every connection
Leave easy access for future servicing
Test pump in clean water before final installation
Seasonal Considerations
Summer Operation
Monitor well water level to avoid dry running
Flush system more frequently in dry seasons
Autumn Prep
Inspect and clean intake as debris increases
Test backup battery system performance
Winter Protection
Remove and store pump if well is at risk of freezing
Disconnect power and flush water line before storage
Installation Success
By following this guide, you’ll enjoy trouble-free water delivery from your 12V deep well submersible pump. For further installation help, check our technical support widgets or contact us directly. Regular maintenance and occasional inspection will ensure years of reliable off-grid or remote water supply.
Experience the Difference With PowerBee Ltd
Award-Winning Quality
Powerbee Ltd is a Best Buy Award Winner 2021-2025
16 Years of Solar Power Expertise
CE Certified Products
Professional Support Within 24 Hours
Customer Protection
30-Day Money-Back Guarantee
12-Month Standard Warranty
Free UK Mainland Shipping
Support Hotline: 07786948899
✓ 30-Day Money-Back Guarantee✓ Free UK Delivery✓ Powerbee : A Best Buy Award Winner 2021-25
How the 12V Deep Well Submersible Pump Works – Complete Guide
Learn how your 12V deep well pump efficiently delivers water from wells, boreholes, or remote sources—ideal for solar or off-grid battery-powered operation.
✓ 12V DC Powered✓ Deep Well Design✓ Solar or Battery Ready✓ Built-in Protections✓ High Lift Performance
Basic Operating Principles
This submersible pump uses robust DC motor technology to lift water from deep below ground, powered by your choice of solar panel or 12V battery.
Power Input System
Connect directly to a 12V battery or solar panel
Draws DC power for high efficiency and portability
Solar use: recommended 100W+ panel
Works off-grid or in remote locations
Pumping Mechanism
Sealed motor spins internal impeller or piston
Creates suction, lifting water from up to 30m depth
Delivers steady flow to surface via pipe or hose
Fully submersible and waterproof for safety
High Lift & Flow
Max head: up to 30 metres (well depth-lift)
Delivers up to 1,000 LPH (16.6 L/min) at optimal conditions
Designed for deep wells, boreholes, or vertical water transport
Power System Operations
This pump is engineered for off-grid living: use with solar panels, deep cycle batteries, or a regulated 12V DC supply for reliable daily water access.
Solar Panel Operation
Connect to a solar panel (12V, 100W or higher)
Add a charge controller for battery charging or regulation
Runs automatically in sunlight—no need for mains power
Perfect for remote or sustainable well operation
Battery Operation
Works with any suitable 12V battery (lead acid, LiFePO4, etc.)
Enables water pumping at night or during cloudy days
Include a fuse for pump protection
Consistent flow regardless of sunlight (battery state dependant)
Direct DC Power
Compatible with regulated DC power supplies
Great for test setups or emergency backup
Ensure voltage is never above 15V for longevity
Lift and Flow Performance
Performance depends on well depth (“head”) and input power. As lift height increases, flow rate will reduce—choose power sources accordingly.
Depth vs. Flow
0m (ground level): Max flow ~1,000 LPH
10m lift: ~850 LPH
20m lift: ~600 LPH
30m lift: ~300–400 LPH
Use shortest pipe run for best flow
Power vs. Performance
Input voltage and wattage affect lift and flow
100–120W recommended for full spec pump
Batteries offer consistent power, solar is variable
Controller can optimize operation
Application Considerations
Irrigation: use tank float switch to prevent dry run
Livestock: oversize battery for overnight fills
Household/backup: ensure adequate stored water volume
Check water level seasonally for uninterrupted supply
Built-in Protection Features
This pump incorporates advanced protections to extend life and improve safety, helping ensure reliable operation in rural/off-grid settings.
Dry Run Protection
Some models include automatic shutoff if no water detected*
Prevents motor burn out
Check water level before use for best results
Voltage & Overcurrent Protection
Protects against input surges or voltage spikes
Fuse installation recommended (10A)
Helps avoid pump or battery damage
Waterproof Construction
Fully sealed IP-rated body
Corrosion-resistant for long-term immersion
Safe for continuous submersible use
Energy Efficiency Features
Engineered for reliable, low-wattage water delivery for off-grid systems—maximizing performance with minimal energy usage, perfect for renewable power setups.
Direct DC Operation
No need for AC conversion = minimal energy loss
Optimized for 12V solar/battery input
Perfect for off-grid households or backup
Modern Motor Technology
Efficient sealed DC motor/impeller design
Long lifespan, robust outdoor construction
Operates efficiently even with variable sunlight
Low Standby Consumption
Zero power draw when not in use
No phantom drain on battery system
Operational Maintenance
Simple maintenance ensures reliable water supply for years. Always disconnect from power before any servicing.
Routine Checks
Inspect cable and connectors for wear monthly
Flush intake and outlet to clear silt/debris regularly
Verify fuse/battery status periodically
End of Season Care
Remove pump from well if freezing is expected
Clean and store dry in off-season
Check seals and O-rings annually
Long-Term Durability
Quality stainless steel/plastic construction
IP-rated body resists corrosion and ingress
Minimal servicing required if used properly
Technical Notes
Performance may vary based on: input voltage, installation height, hose diameter/length, and well water quality. Always match system capacity to your water needs.
Environmental Factors
Very low water levels can affect cooling and longevity
Cold temperatures may limit use; remove before freezing
Installation Tips
Use correctly rated cable for long runs
Protect connections from moisture
Avoid kinks or sharp bends in outlet hose
Optimization
Use float or tank switch to prevent dry running
Oversize battery for reliable operation in overcast periods
How It Works - At A Glance
Solar or battery power is delivered to the submersible pump, which lifts water up to the surface for your home, garden, irrigation, or livestock—off-grid and reliable.
Typical Applications
Borehole and deep well supply
Remote livestock watering
Irrigation tanks, water transfer in rural locations
Emergency/off-grid water extraction
Key Benefits
No mains electricity required
Portable and easy to install
Low maintenance, highly reliable
At-a-Glance Performance
12V DC, up to 30m vertical lift
Max flow ~1,000 LPH at ground level
Optimized for solar, batteries, off-grid living
Reliable Water Delivery – Off Grid or On Demand
Your 12V deep well submersible pump offers clean water wherever you need it. With smart protections and energy-efficient operation, it’s perfect for modern off-grid homes, rural properties, or emergency backup water needs.
Experience the Difference With PowerBee Ltd
Award-Winning Quality
Powerbee Ltd is a Best Buy Award Winner 2021-2025
16 Years of Solar Power Expertise
CE Certified Products
Professional Support Within 24 Hours
Customer Protection
30-Day Money-Back Guarantee
12-Month Standard Warranty
Free UK Mainland Shipping
Support Hotline: 07786948899
✓ 30-Day Money-Back Guarantee✓ Free UK Delivery✓ Powerbee : A Best Buy Award Winner 2021-25
