ALLPOWERS R2500 Portable Power Station 2016Wh with 2016Wh LiFePO4 battery and 2500W output. Power 10 devices simultaneously — full charge via mains in ~1 hour (combined 2500W AC + solar input).
2016Wh LiFePO4 battery — 3,500+ cycles to 80% capacity lifespan
A Reliable Battery Backup for Home, Garden, and Off-Grid Use
This 2016Wh battery unit gives you 2500W of silent, emission-free power from 10 output ports — enough to run real appliances like a kettle, mini-fridge, or power tools, not just charge phones. Whether you're hosting a garden party, preparing for a power cut, heading to a campsite, or working off-grid, the ALLPOWERS R2500 charges from flat to 80% in undefined and accepts up to 1000W from a solar panel. UK stock, dispatched from Great Britain.
Power 10 Devices Simultaneously
The R2500 has 10 output ports: 5 pure sine wave AC outlets (230V), 2 USB-C ports (up to 100W each), 2 USB-A QC3.0 ports, and a 12V car socket. Run a fridge, charge laptops, power outdoor lighting, and top up phones — all at the same time.
2500W Output — Runs Real Appliances
At 2500W continuous (4000W peak), the R2500 handles kettles, microwave ovens, hair dryers, and power tools without issue. Pure sine wave output makes it safe for sensitive electronics, motor-driven appliances, and medical equipment. Most UK kettles and most small kitchen appliances fall comfortably within the 2500W continuous limit.
0–80% in undefined
Charge from flat to 80% in just undefined via mains — no external adapter, just the included cable into a standard wall socket. Full charge takes approximately 65 minutes. Alternatively, charge via a compatible solar panel at up to 1000W using the built-in MPPT controller — ideal for off-grid use in the garden or on a campsite where British sunshine allows.
Expandable Capacity up to 5472Wh
Need more runtime? Connect up to 3× B1000 battery packs to the R2500, scaling total stored energy from 2016Wh up to 5472Wh. At that capacity, a standard UK household fridge could run for well over two days without recharging.
15ms UPS — Power Cut Protection
Keep the R2500 plugged into the mains with your critical devices connected to its outputs. When the power goes out, it switches to battery in just 15ms — fast enough that a desktop PC, NAS drive, or broadband router won't lose connection or data. Useful year-round in areas of the UK prone to outages.
LiFePO4 — The Safest Battery Chemistry Available
The R2500 uses lithium iron phosphate (LiFePO4) cells — not the NMC chemistry found in cheaper units. LiFePO4 doesn't overheat or enter thermal runaway, retains over 80% capacity after 3,500+ cycles to 80% capacity, and is safe for use indoors. At Under 45dB (Mute mode) in Mute mode, it's quiet enough to run overnight in a bedroom or home office. Backed by a 5 years.
What's in the Box
1× ALLPOWERS R2500 Portable Power Station
1× AC mains charging cable
1× Car charging cable (12V)
1× User manual
Note: solar panels not included — compatible panels sold separately
A standard UK fridge uses around 100–150W. The R2500's 2,016Wh battery will run a typical household fridge for approximately 13–20 hours — comfortably covering a full day and night during a power cut.
What appliances can the R2500 power?
The R2500 handles most UK household appliances at its 2,500W continuous (4,000W peak) output — including kettles, microwaves, hair dryers, power tools, and small electric heaters. It is not designed for high-draw fixed appliances like electric ovens or electric showers.
How much solar input does the R2500 support?
The R2500 accepts up to 1,400W of solar input via its built-in MPPT controller, making it one of the fastest solar-charging power stations in its class. On a clear summer day in the UK, a 400W solar panel array could recharge it in approximately 5–6 hours.
Can the R2500 be expanded further?
Yes. The R2500 supports up to three B1000 expansion battery packs (1,152Wh each), taking total capacity from 2,016Wh to 5,472Wh. Two R2500 units can also be connected in parallel, doubling output to 4,000W continuous (12kW peak) — making it suitable for extended off-grid use, whole-home short-term backup, or running a campervan or narrowboat electrical system.
Is the R2500 safe to use indoors?
Yes — it produces zero emissions and is completely safe for indoor use. Unlike petrol generators, there is no carbon monoxide risk. In Mute mode it operates at under 45dB, making it suitable for home use.
Rate this product
0/5
0 Reviews
Please rate this product, describe its advantages and disadvantages, please share your impression about its use
The ALLPOWERS R2500 Portable Power Station 2016Wh is ready to use straight out of the box. No installation is required — simply charge it up and connect your devices. Follow the steps below to get up and running quickly.
Step 1 — Initial Charge
Before first use, charge the R2500 to 100% using the included AC mains cable. This takes approximately 65–90 minutes from empty. The front display shows charging progress as a percentage.
Tip: If the unit has been in storage for more than 3 months, it may arrive partially discharged. A full charge before first use ensures the battery management system (BMS) is properly calibrated.
Step 2 — Connecting a Solar Panel (Optional)
To charge via solar, connect a compatible solar panel to the DC solar input port using an MC4 or XT60 connector (check your panel's output connector type). The R2500 accepts solar input of 1000W max (integrated MPPT).
Position your solar panel in direct sunlight, angled toward the sun
Connect the panel to the R2500 solar input — charging begins automatically
The display shows the incoming solar wattage in real time
Maximum solar input: 1000W — use a single panel or combine multiple panels up to this limit
Step 3 — Connecting Your Devices
Press the main power button to turn the R2500 on
Press the AC button to activate the AC outlets (for mains-powered appliances)
Press the USB button to activate the USB-C and USB-A ports
Connect your devices to the appropriate ports
The display shows total output wattage and estimated remaining runtime
Always switch off output groups you are not using — this extends battery runtime significantly.
Adding Expansion Batteries (Optional)
The R2500 supports up to three B1000 battery packs to increase total capacity from 2016Wh up to 5472Wh. Connect the expansion battery to the dedicated port on the side of the R2500 using the supplied cable. The system automatically recognises the added capacity and updates the display.
Storage & Maintenance
Store at 20–30°C in a dry location away from direct sunlight
For long-term storage, keep the battery at 50–80% charge
Recharge to 50–80% every 3 months if not in regular use
Do not expose to rain, moisture, or extreme temperatures
The R2500 does not require any servicing — the LiFePO4 battery is maintenance-free
The ALLPOWERS R2500 Portable Power Station 2016Wh works as a portable battery hub. Charge it up from the mains, a solar panel, or a car socket — then use it to power or charge anything connected to its 10 output ports. There are no moving parts, no fuel, no fumes and no noise.
Charging the Power Station
There are three ways to charge the R2500:
Mains (fastest): Plug the included AC cable into any standard wall socket. Fast mode charges 0–80% in undefined. No external adapter needed.
Solar panel: Connect a compatible solar panel (sold separately) to the DC input. The built-in MPPT controller accepts up to 1000W — ideal for off-grid or garden use on a sunny day.
Car socket: Connect via the 12V car cigarette lighter port for charging on the move.
You can also charge the R2500 and use its outputs at the same time — so it never needs to go offline.
Powering Your Devices
Press the power button to switch the R2500 on. Select which output groups to activate using the front panel buttons — AC outlets, USB ports, and DC outputs can each be switched on independently to conserve battery life when not all ports are needed.
AC outlets (5×): Standard 230V UK-compatible sockets. Suitable for kettles, laptops, TVs, tools, and most household appliances up to 2500W (4000W peak).
USB-C (2×): Up to 100W per port — fast charges laptops, tablets, and smartphones.
USB-A (2×): QC3.0 fast charging for phones and accessories.
Car socket: 12V/10A output for car accessories, tyre inflators, and 12V appliances.
UPS Mode — Automatic Power Backup
Keep the R2500 plugged into the mains and connect your critical devices to its AC outputs. If the mains power fails, the R2500 switches to battery power in just 15 milliseconds — fast enough that most devices won't even notice. Ideal for desktop computers, broadband routers, and home office equipment.
App Control
Connect to the ALLPOWERS app via Wi-Fi or Bluetooth to monitor battery level, input and output wattage in real time, set charging modes (Fast / Standard / Mute), and receive low-battery alerts. The Mute charging mode reduces fan noise to under Under 45dB (Mute mode) — suitable for overnight charging in a bedroom.
