Order by 3:00 PM Monday – Friday to receive your parcel the next day.
Orders placed after 3:00 PM ship the next working day on the same 24‑Hour service and usually arrive the following day.
See Full Delivery Information.
Overview
Ceiling light with 400 LM output, 10,000mAh rechargeable battery, PIR motion sensor, remote control, and IP44 rating.
Select the light colour and running behaviour to suit how you want the ceiling light to operate in your space. Professional cordless lighting with 400-lumen brightness and adjustable white tones. The built-in 10,000mAh battery lasts up to 120 hours and recharges via USB-C – ideal for sheds, warehouses, and spaces without wiring.
✓ 400 Lumens (40W Equivalent)✓ USB-C Rechargeable✓ 13ft Motion Sensor✓ 3000K/4000K/6000K✓ 500+ Charge Cycles✓ Free 24 Hour UK Delivery On All Orders
Unlike disposable battery lights, the Ultrabright Pro maintains consistent brightness until recharge. Its radar+PIR sensor detects movement through thin walls while ignoring small pets. The frosted panel eliminates glare for comfortable all-night use.
Installs in 15 minutes – includes all mounting hardware
Why This Outperforms Standard Battery Lights
Feature
Old Battery Lights
Ultrabright Pro
Power Cost
£24+/year (AA batteries)
£0.50/year (USB charge)
Brightness
Dim over time
Consistent 400lm output
Control
Manual switch only
Remote + Motion + Timer
Adjust warmth and brightness instantly via RF remote
Key Benefit: Eliminates battery waste while providing 3x brighter light than basic models. The 10,000mAh battery lasts 2+ years with weekly use.
Smart Lighting Made Simple
Operation Modes
Constant: 15hrs at 100%
Motion: 30s-120min timeout
Eco: 120hrs at 10%
Auto memory function
Controls
RF remote (30ft range)
Wall toggle switch
5 timer presets
Infinitely dimmable
Durability
ABS + body
IP44 splash-proof
-20°C to 50°C rating
2-year warranty
Where It Works Best
Wire-free installation in any location – no mains power needed
Installing your Ultrabright Pro takes under a minute thanks to its patented magnetic bracket. No wiring, no tools needed – just mount the bracket and snap the light into place. Remove it just as easily when charging.
Bracket snaps onto any flat surface – light attaches magnetically
Bracket Mounting
Surface Prep: Clean with rubbing alcohol for best adhesion
Screw Option: Use included screws for permanent mounting
Adhesive Option: 3M tape holds up to 5kg (no drilling)
Alignment: Ensure bracket is flush against surface
Light Attachment
Snap On: Align light's metal plate with bracket
Secure: Powerful magnets hold firm (test with gentle tug)
Remove: Pull straight down for charging
Adjust: Rotate 360° after attachment
Optimal Placement
Height: 2-3m ceiling height for best motion detection
Sensor Range: Point bracket toward entry points
Avoid: Metal surfaces that may interfere with magnets
Testing: Check motion detection before finalizing position
Pro Tip for Renters
The 3M adhesive bracket leaves no residue when removed. For extra security without screws, add a drop of museum putty to the bracket's corners.
How to Charge
Remove: Pull light straight down from magnetic bracket
Connect: Use included USB-C cable (works with any 5V charger)
