Order by 3:00 PM Monday – Friday to receive your parcel the next day.
Orders placed after 3:00 PM ship the next working day on the same 24‑Hour service and usually arrive the following day.
See Full Delivery Information.
Overview
Solar step lights with 100 LM output, PIR motion activation, and IP67 waterproof housing for outdoor deck and stair edges (2 pack).
Place the lights on step edges or other corners and position them where the solar panel can receive clear daylight exposure, then secure them using the screw or adhesive mounting options. This helps you plan the layout for consistent after-dark operation without needing any wiring.
✓ 5M Motion Detection✓ 100LM Burst + 30LM Guide Light✓ IP67 Waterproof Metal Housing✓ 8H Runtime, 6H Charge✓ Screw or Adhesive Mounting✓ Free 24 Hour UK Delivery On All Orders
Motion-Sensing Stairway Security + Wireless Solar Power
Precision Engineering for Smart Outdoor Lighting
Engineered for both security and ambiance, these solar step lights
use PIR motion sensors to detect movement up to 5 meters away,
triggering an instant 100-lumen burst to illuminate stairs,
decks, and pathways. When idle, they automatically dim to a soft
30-lumen guide light for all-night visibility with minimal
energy use.
Unlike basic solar step lights, this motion-activated design
uses adaptive technology to balance security and energy efficiency.
The result is brighter light when you need it and a
gentle glow when you don’t—all while conserving stored power.
Smart Hybrid Modes
Security Mode: 100LM burst on movement
Ambient Mode: Low-level dusk-to-dawn glow
Darkness-dependent: Motion activates at night
Installation Versatility
Mount on wood, brick, stone, or composite
Suitable for steps, walls, and railings
Best results with clear daylight exposure
PowerBee Advantages
16+ years solar lighting expertise
UK-based customer support
CE / FCC / RoHS certified
30-day hassle-free returns
Invest in smarter outdoor lighting backed by PowerBee’s
proven quality. These motion-sensing solar step lights help
improve safety, deter intruders, and enhance curb appeal
while reducing energy costs. Buy with confidence from a trusted UK
solar specialist.
Install your motion-activated solar step lights in minutes—no wiring or electrician needed. The dual mounting options (screws or adhesive) work on wood, concrete, brick, and composite surfaces. Follow these guidelines to optimize motion detection and solar charging.
Motion-Sensing Stairway Security + Wireless Solar Power
Optimal Placement
Solar Panel: Face south (UK/Ireland) for maximum winter sun exposure. East/west works in summer.
Motion Sensor: Point the front wedge (flat side) toward movement areas (e.g., stair approach).
Avoid: North-facing locations or shaded spots under railings/overhangs.
Height: Install 0.5–1m above ground for best motion detection (5M range).
Before You Start
Test motion sensor range with temporary placement before permanent mounting.
Fully charge lights in direct sun for 8 hours before first use.
Clean surfaces with rubbing alcohol for stronger adhesive bonding.
Screw Mounting (Recommended)
Mark drill points using the built-in base holes.
Pre-drill pilot holes for hardwood/stone surfaces.
Secure with provided stainless steel screws (rust-resistant).
Adhesive Mounting
Press adhesive pad firmly onto the light’s metal base.
Remove backing and press against surface for 30+ seconds.
Wait 24 hours before testing motion to ensure adhesion.
Pro Tip for Motion Calibration
If motion detection seems inconsistent, adjust the light's angle slightly downward. The 120° sensor works best when parallel to movement direction (e.g., walkway paths).
Your motion-activated solar step lights combine intelligent detection with energy-efficient lighting. Unlike basic solar lights, these auto-adjust between motion-triggered bursts and ambient glow, providing security when needed and conserving energy when not. Here’s how each component works together:
Daylight Charging
High-yield solar panel absorbs sunlight even on cloudy days.
South-facing orientation delivers best winter performance (UK & Ireland).
East/West placement performs well during longer summer days.
Built-in overcharge protection extends battery life.
Energy Management
Upgraded 1200mAh Li-ion battery stores more power for longer nights.
Weatherproof PC housing protects internal cells.
Automatically reduces output when charge levels are low.
Smart Night Operation
Light-sensing activation: Motion detection operates only in full darkness.
Adaptive timing: Motion timeout adjusts automatically in cold weather.
Why Motion + Dusk-to-Dawn Matters
This hybrid system enhances safety with instant brightness when movement is detected, while maintaining gentle background illumination through the night. The PIR motion sensor operates passively, using minimal energy.
