Order by 3:00 PM Monday – Friday to receive your parcel the next day.
Orders placed after 3:00 PM ship the next working day on the same 24‑Hour service and usually arrive the following day.
See Full Delivery Information.
Overview
Genuine glacier stone solar water feature with a 760 LPH adjustable pump, 10W solar panel, and 12V 4.5Ah battery backup for reliable day and evening operation.
Set the reservoir below ground level and position the stone centrally on the supporting grid, then cover the grid with cobbles or rocks to finish the surface around it.
Our Beautiful Natural Stone Glacier Water Feature, allows You to create a stunning Focal Point in Your Garden, Relax to the sound of cascading water gently flowing over a Natural Glacier Rock
Each Glacier Stone is Unique in Size, Shape & Colour
These Rocks date from the last Ice Age and were deposited in the UK as the Ice Field withdrew leaving completely stunning unique glacier rocks behind
Aesthetically, there's nothing quite like the sight & sound of a genuine stone water feature glistening in the sun, each glacier is completely unique in shape and size, we have hand selected the most stones, and will email you a choice of the rocks available, so that you can choose your own.
Our Solar Powered Stone Water Feature is a complete Kit
This Glacier fountain feature comes as a complete Kit, everything you need is included. The 50cm Round Reservoir is a strong black plastic tub, the grid is capable of supporting 150 kg per m2
This reservoir is sited below ground level & is supplied with a round galvanised steel grid which includes a handy pump access cover.
The grid overlaps the reservoir by 2cm on each side. Simply place your water feature centrally and then hide the grid with cobbles, rocks, paddle stones etc.
The square opening cover in the grid allows access for servicing the pump
The Kit comes with a powerful Solar Panel (10 Watt ) & Solar Powered Pump with a Strong Variable Flow Rate (maximum): 760L/H (200.8GPH), which enables you to set the flow rate just how You want.
Can be Installed Above or Below Ground (If above Ground the Reservoir will need support via bricks inside)
For below Ground you will need to dig an appropriately sized hole, use reservoir for marking (upside down) place the reservoir in this hole flush and level - ensure the reservoir is level and back fill space with earth or sand.
Place pump inside reservoir, fix tubing (included) to pump, place grid on reservoir, thread tubing through grid & pump lead through side of grid (through one of the grid holes)
Place stone centrally on grid & thread tubing through stone (hole drilled in stone) cut excess tubing off
Connect the lead from the pump to the battery, then connect the battery to the panel, place panel in sunny location
Fill reservoir with water
Cover the remaining Grid with Your choice of stones
To Install Above Ground You will need to support the Reservoir Tub, place bricks inside the reservoir tub that reach up to the grid, so that inside the tub there are at lest two columns of bricks, so that the weight of the rock is supported from grid to the base of the reservoir. Enjoy !!
General Installation of the Solar Water Pump
Unpack all components carefully.
Connect the "INPUT" cable of the battery back-up to the solar module, and tighten the screw for protection. Unfold the solar panel and fasten it with the panel fixture. Install the solar module at a sunny place, adjust the angle let the solar module facing SOUTH toward mid day sun.
Insert the pump plug to the OUTPUT socket of the battery back-up, and also tighten the screw.
Connect one nozzle on to the pump then connect the tube and thread through the stone.
Make sure to place the pump fully underwater when the pump operates.
Turn the switch to the position "ON". The green LED illuminates. The solar pump is starting to operate. The LED may illuminate RED while it operates at first time, because the battery will lose energy slowly in stock. It just needs to be charged for 2 to 3 hours in the sunlight, then it will change to GREEN and the pump starts to work.
The pump will automatically stop running while the battery is discharged to its lower limit voltage, and the red LED illuminates at the meantime.
When the battery is recharged to its starting voltage, the LED will flash RED-GREEN twice every 10 seconds, and it will last 30 minutes. Then the pump will automatically operate and the LED illuminates GREEN again.
Adjust the regulator switch to get different pump performance. The pump can operate at the voltage range of 12V-24V.
Turn the timer switch to the position "ON", the pump works 15 minutes every hour. It can save the battery energy in this operating mode, especially for winter or cloudy day use.
The HIGHER the pump is in the water reservoir the less work it has to do so running times are longer and more consistent the higher the pump, you can raise the pump with an upturned flower pot or brick.
If you want to have long operating time in the evening, then turn the switch to "OFF" position during the day and turn it "ON" whenever you need.
The panel needs to be facing south Plug the panel in to the battery Connect the battery to the pump Place pump in Water - connect tubing to pump Turn the battery on The Pump is powered by the Battery, and the battery is Powered by Solar Energy from the Panel.
