Use this timer controller inline between your starter cable and your ConnectPro lights, so the control box sits between the plug end and your display connection.
Timer Controller for our mains voltage connectable lights range.
The timer controller fits between your starter cable and your lights, with 2 x 15cm cable lengths.
It has been manufactured with heavy duty rubber cable ensuring reliability.
Set And leave Timer Function
Connect the timer controller between your starter cable and your lights, to give your display ultimate convenience! You can choose between the 6 or 8 hour timer options, depending on what best suits you.
Easy to use, just press the button on the left of the timer box to switch your lights on or off. Press the button on the right once to activate the 6 hour timer (the light will display green), then press it again to activate the 8 hour timer (the light will display red). Press this button once more to switch the timer off.
The timer operates on a 24 hour cycle; if you select the 6 hour timer, your lights will stay on for 6 hours, turn off for 18 hours, then automatically turn back on at the same time each day.
With the 8 hour timer, your lights will stay in for 8 hours, turn off for 16 hours, then automatically turn back on at the same time each day.
Compatible with all the lights in the entire ConnectPro range, from festoons and strings, to silhouettes and icicles, this timer controller is rated IP65, meaning it’s suitable for prolonged outdoor use.
There are two sections of cable, each 15cm in length, one leading to the starter cable and one leading to the lights.
The timer controller connects to your starter cable, and your lights connect to the timer controller. If the starter cable plug is used outdoors, a dry box will need to be used.