Use this starter cable to place a timer controller inline before your ConnectPro lights, so the control box sits between the plug end and your display connection.
Starter Cable with Timer for our mains voltage connectable lights range.
The starter cable comes with a standard household plug and 2 * 15cm cable lengths.
It has been manufactured with heavy duty rubber cable ensuring reliability.
Set And leave Timer Function
Connect the starter cable with timer controller before your lights, to give your display ultimate convenience! You can choose between the 6 or 8 hour timer options, depending on what best suits you.
Easy to use, just press the button on the timer box to turn your lights on, press again to activate the 6 hour timer (the light will display green), then press again to activate the 8 hour timer (the light will display red). Press once more to turn the lights off, it’s as simple as that.
The timer operates on a 24 hour cycle; if you select the 6 hour timer, your lights will stay on for 6 hours, turn off for 18 hours, then automatically turn back on at the same time each day.
With the 8 hour timer, your lights will stay in for 8 hours, turn off for 16 hours, then automatically turn back on at the same time each day.
Compatible with all the lights in the entire ConnectPro range, from festoons and strings, to silhouettes and icicles, this timer controller is rated IP65, meaning it’s suitable for prolonged outdoor use.
There are two sections of cable, each 15cm in length, one leading to the starter cable and one leading to the lights.
Simply Connect the mains plug end to your existing power supply with the inbuilt plug, and connect the timer section next, then plug in additional ConnectPro light strings in to the port.
