Order by 3:00 PM Monday – Friday to receive your parcel the next day.
Orders placed after 3:00 PM ship the next working day on the same 24‑Hour service and usually arrive the following day.
See Full Delivery Information.
Professional cordless lighting with 400-lumen brightness and adjustable white tones. The built-in 10,000mAh battery lasts up to 120 hours and recharges via USB-C – ideal for sheds, warehouses, and spaces without wiring.
✓ 400 Lumens (40W Equivalent)✓ USB-C Rechargeable✓ 13ft Motion Sensor✓ 3000K/4000K/6000K✓ 500+ Charge Cycles✓ Free 24 Hour UK Delivery On All Orders
Unlike disposable battery lights, the Ultrabright Pro maintains consistent brightness until recharge. Its radar+PIR sensor detects movement through thin walls while ignoring small pets. The frosted panel eliminates glare for comfortable all-night use.
Installs in 15 minutes – includes all mounting hardware
Why This Outperforms Standard Battery Lights
Feature
Old Battery Lights
Ultrabright Pro
Power Cost
£24+/year (AA batteries)
£0.50/year (USB charge)
Brightness
Dim over time
Consistent 400lm output
Control
Manual switch only
Remote + Motion + Timer
Adjust warmth and brightness instantly via RF remote
Key Benefit: Eliminates battery waste while providing 3x brighter light than basic models. The 10,000mAh battery lasts 2+ years with weekly use.
Smart Lighting Made Simple
Operation Modes
Constant: 15hrs at 100%
Motion: 30s-120min timeout
Eco: 120hrs at 10%
Auto memory function
Controls
RF remote (30ft range)
Wall toggle switch
5 timer presets
Infinitely dimmable
Durability
ABS + body
IP44 splash-proof
-20°C to 50°C rating
2-year warranty
Where It Works Best
Wire-free installation in any location – no mains power needed
Installing your Ultrabright Pro takes under a minute thanks to its patented magnetic bracket. No wiring, no tools needed – just mount the bracket and snap the light into place. Remove it just as easily when charging.
Bracket snaps onto any flat surface – light attaches magnetically
Bracket Mounting
Surface Prep: Clean with rubbing alcohol for best adhesion
Screw Option: Use included screws for permanent mounting
Adhesive Option: 3M tape holds up to 5kg (no drilling)
Alignment: Ensure bracket is flush against surface
Light Attachment
Snap On: Align light's metal plate with bracket
Secure: Powerful magnets hold firm (test with gentle tug)
Remove: Pull straight down for charging
Adjust: Rotate 360° after attachment
Optimal Placement
Height: 2-3m ceiling height for best motion detection
Sensor Range: Point bracket toward entry points
Avoid: Metal surfaces that may interfere with magnets
Testing: Check motion detection before finalizing position
Pro Tip for Renters
The 3M adhesive bracket leaves no residue when removed. For extra security without screws, add a drop of museum putty to the bracket's corners.
How to Charge
Remove: Pull light straight down from magnetic bracket
Connect: Use included USB-C cable (works with any 5V charger)
