Order by 3:00 PM Monday – Friday to receive your parcel the next day.
Orders placed after 3:00 PM ship the next working day on the same 24‑Hour service and usually arrive the following day.
See Full Delivery Information.
Overview
Aluminium-bodied solar wall light delivering 500 lumens with PIR motion detection and selectable warm or cool white for a tailored lighting feel.
Mount it on an exterior wall and let the solar panel recharge during daylight so the light is ready to operate after dark without ongoing power input.
✓ Up to 500 Lumens✓ Aluminium Housing✓ Dual Colour Output✓ 4 Lighting Modes✓ PIR Motion Sensor
The aluminium housing provides added durability compared with plastic wall lights, while the low-profile design keeps the installation discreet on modern and traditional properties alike.
Durable aluminium construction with discreet wall-mounted design.
Applications & Uses
This wall-mounted solar security light is suited to locations where controlled illumination and a robust exterior finish are important.
Residential
Front doors and entrances
Side access routes
Garden walls and fences
Garages and outbuildings
Architectural Spaces
Modern façades
Rendered or brick walls
Feature entrances
Contemporary patios
Usage Profile
Occasional to moderate activation
Localised security lighting
Wall-mounted installations
Solar-powered convenience
Core Features
Designed to balance durability, appearance and functional security lighting, this model focuses on dependable everyday use rather than oversized flood output.
Lighting Output
Up to 500 lumens output
112 × 2835 SMD LEDs
150° wide beam angle
Motion Detection
PIR motion sensing
Detection range up to 5 metres
Automatic dusk activation
Colour Options
Warm white (3000K)
Cool white (6500K)
Selectable output colour
Construction
Aluminium housing
Weather-resistant build
Compact wall-mounted form
Compact LED layout designed for even wall-mounted illumination.
Lighting Modes
Four operating modes allow you to adjust how the light behaves depending on the season and how frequently the area is used.
Mode 1
Constant light throughout the night.
Mode 2
Dim light that brightens when motion is detected.
Mode 3
Motion-activated lighting only.
Mode 4
Reduced output energy-saving mode.
Installation & Positioning
The light mounts directly to exterior walls using the supplied fixings. For best performance, install where the solar panel receives direct sunlight for part of the day.
Easy Installation - Wall Mounted Solar Security Light
The Albion 500 Lumen Solar Wall Light mounts directly to any outdoor wall using the included fixings. The 150° wide beam angle and PIR motion sensor provide effective coverage for entrances, pathways, and garden walls.
Mount at 2–3 metres height for optimal PIR detection range (up to 5 metres)
Position with the solar panel facing south or south-west for best charging
Use the mode button to select from 4 lighting modes including motion-only and dusk-to-dawn
Switch between warm white (3000K) and cool white (6500K) to suit your preference
These solar powered lights are designed for easy, reliable outdoor lighting with minimal maintenance. Here’s how they work and what you need to know for best results year-round.
Daytime Charging
Solar panel collects sunlight and charges the internal battery during the day.
For best results, install the panel facing south (in the northern hemisphere), especially in winter when sunlight is limited.
Keep the panel clean and free from shade for maximum efficiency.
Automatic Night Operation
At dusk, the light automatically switches to standby mode.
Built-in motion sensor detects movement and activates the light when needed.
After a set time with no motion, the light returns to standby or turns off to save power.
Selectable Lighting Modes
Most models offer three modes, set by a button on the light or with a remote control:
Mode 1: Motion-activated full brightness, then off — recommended in winter, or if the panel faces north.
Mode 2: Dim light all night, full brightness with motion — works well in spring/autumn with good sunlight exposure.
Mode 3: Constant light (Flood light mode) — best for summer or very high sunlight conditions; may reduce battery runtime in shorter days.
Tip: Adjust mode seasonally for optimal performance and battery life.
Maintenance & Tips
Wipe the panel regularly to remove dust and debris.
Check the light’s position seasonally to ensure good sun exposure.
Test and adjust the motion sensor range if needed.
With correct placement, seasonal mode selection, and occasional cleaning, your lights will provide years of convenient, efficient illumination—no wiring or manual switching required.
I have just bought another two of these, because the first is so good (had it for over a year now). They are very basic looking motion activated lights that come on only in the dark. We live in a very rural area with no streetlights and on a moonless night, it used to be a tricky walk from our front door to the car, but these provide a brilliant amount of light for the journey. Highly recommended and a bargain price.
