Order by 3:00 PM Monday – Friday to receive your parcel the next day.
Orders placed after 3:00 PM ship the next working day on the same 24‑Hour service and usually arrive the following day.
See Full Delivery Information.
Overview
Triple-sided solar floodlight that covers three directions at once with 4000 lumens, PIR motion sensing, and adjustable heads for wide yard and driveway coverage.
Up to 4000 lumens in motion mode across three heads
Triple-sided coverage for wide areas
PIR motion sensor for auto activation
Adjustable head angles
Separate 20W solar panel with 5m cable; no mains wiring
IP65 weatherproof year-round
Motion and steady-light modes with adjustable brightness
Set the light head and its separate sensor to suit how you want the area covered, then position the solar panels where they can receive direct sunlight for charging.
✓ 4000 lumens maximum✓ Triple-sided LED layout✓ Dual PIR sensors✓ Remote PIR sensor included✓ Remote sensor links up to 100ft away✓ 20,000mAh LiFePO4✓ 20W monocrystalline panel✓ Remote control included
Designed for wide-area coverage, this professional-grade LED security light combines a powerful triple-sided LED array with multiple motion detection zones for enhanced security. The integrated dual PIR sensors on the light head work alongside a separate, solar-powered remote PIR sensor to extend detection coverage in multiple directions — ideal for large or complex outdoor spaces.
Switch between motion activation, dim standby, or constant floodlight modes using the included remote control.
Key Features & Capabilities
Built to perform reliably in UK conditions, this high-output 4000-lumen light delivers powerful illumination, wide beam coverage, and extended motion detection — all without mains wiring required.
Advanced Illumination
Up to 4000 lumens in motion mode; 2000 lumens in steady-light mode
Energy-saving dim standby mode available
210 premium LED chips in triple-sided layout
180° wide main light coverage
Illuminates areas up to 3000 sq ft
Smart Detection
Dual PIR sensors integrated into the light head
Additional remote PIR sensor with its own mini solar panel
Detect movement at the light and at a separate entrance or gateway
Position the additional PIR sensor up to 100ft (30m) from the light within wireless range; movement detected at that location triggers the main light
Optimised PIR sensitivity for reliable triggering
Power System
20W monocrystalline solar panel (24% conversion rate)
20,000mAh LiFePO4 rechargeable battery
Steady-light timer selectable from 2 to 12 hours; actual runtime depends on charge and brightness
Approx. 5 hours charging in full sunlight
Remote PIR sensor powered by its own solar panel
For best year-round performance, both the main 20W solar panel and the mini panel for the remote PIR sensor should be positioned to receive maximum direct sunlight, ideally south-facing where possible.
The separate 20W panel can be placed in direct sunlight using its 5m cable. Winter runtime depends on available sunlight and how often, how brightly and how long the light operates.
Professional Applications
Designed for both security and high-output floodlighting, this system is suitable for a wide range of demanding outdoor environments.
Commercial Use
Industrial facilities and yards
Storage compounds
Business premises
Loading bays and service areas
Residential Security
Large private properties
Driveways and access roads
Garden boundaries and perimeters
Entrance and gate areas
Floodlight Coverage
Outdoor events and work areas
Sports and recreation zones
Parking facilities
Construction and temporary sites
Adjust brightness, modes and timers with the included remote control.
Intelligent Control & Multi-Function Operation
Combining high-output illumination with multiple detection zones and intuitive remote control, this system lets you balance brightness and operating time to suit the available solar charge.
Operating Modes
Motion detection via main and remote PIR sensors
Steady-light mode at 2000 lumens
Dim standby lighting option
Remote brightness settings: 60%, 80% or 100%
Timer Functions
Motion duration: 30 seconds, 3 minutes or 10 minutes
Dusk-to-dawn operation available
Steady-light timer: 2 to 12 hours
Automatic dimming features
Build Quality
IP65 weatherproof construction
Operates from -20°C to 50°C
Long-life LED performance
CE & RoHS certified
Choose lighting modes, timers and brightness to suit your needs.
20,000mAh LiFePO4 battery; runtime varies with charge, brightness and use
Wireless Sensor Link
Additional PIR sensor can be positioned up to 100ft (30m) from the main light within wireless range, triggering it when movement is detected at the sensor location
Detection Angle
Dual PIR sensors on the light head, plus a separate remote PIR sensor to cover another location
Solar Panel Cable
Approximately 5m (16.4ft) between the separate panel and light
Operating Modes
Motion Detection, Constant-On Floodlight Mode, Dim Light Standby
Timer Settings
Motion: 30 seconds, 3 minutes or 10 minutes. Steady light: 2 to 12 hours
Coverage Area
Up to 3000 sq ft illuminated area
Weather Rating
IP65 Weatherproof – rain and heat resistant
Operating Temperature
-20°C to 50°C
Remote Control
Yes – Included with multi-function lighting modes & brightness settings
Charging Time
Approx. 5 hours in full sunlight
Operating Time
Actual runtime depends on solar charge, brightness, mode and motion activations; a timer setting does not guarantee that runtime
How To Install & Optimise Your Security Floodlight:
Complete installation guide for your three-component floodlight system – featuring the main triple-sided LED light head with built-in dual PIR motion sensors for 180° coverage, a large separate 20W high-efficiency monocrystalline solar panel, and an additional remote PIR motion sensor powered by its own mini solar panel for extended coverage.
Component Overview
Main triple-sided LED light head with built-in dual PIR sensors
Large 20W monocrystalline solar panel
Additional remote PIR sensor with mini solar panel
Metal mounting brackets included
Approximately 5m cable between the main solar panel and light
Main Solar Panel & Light Head Installation
Panel Mounting Instructions
Mount facing due south | Set at 45° angle for optimal year-round charging | Keep panel clear of shade and debris
Light Head Mounting Guide
Mount at 2–3 meters height | Ensure level installation | Triple-sided LED head provides 180° detection and light coverage
Additional Remote Motion Sensor Setup
Sensor Positioning
Mini solar panel on remote sensor must face south
Powers the remote PIR sensor – critical for winter
Place the remote PIR sensor within wireless range, up to 100ft (30m) from the light; keep the signal path clear
Avoid obstruction by walls, vegetation, or objects
Position to detect movement at the entrance or area you want to monitor
System Configuration
Select desired lighting mode via remote
Choose brightness: 60%, 80% or 100%
Set motion duration to 30 seconds, 3 minutes or 10 minutes; steady-light timer is 2 to 12 hours
Walk-test both sensors for optimum coverage
Confirm dual PIRs trigger the light correctly
Charging Requirements
Charge both solar panels for 24 hours before first use
Main 20W panel powers the light head
Mini panel powers the remote PIR sensor
Avoid shade on either panel at any time of day
Solar charging only; no mains or USB charging facility
Check charge indicators on both components
Maintenance Tips
Clean both panels monthly for peak efficiency
Regularly check sensor alignment and angle
Inspect and secure all cable connections
Test both main and remote motion sensors
Ensure mounting brackets remain secure
Troubleshooting
Check both panels are facing due south
Ensure remote PIR has clear line of sight to main unit
Verify all cable and sensor connections
Monitor both battery levels
Replace remote control battery if unresponsive
Assess charging performance in current conditions
Walk-test detection and reposition sensors as needed
Discover advanced floodlighting that combines high-efficiency energy harvesting, intelligent dual PIR motion detection, and ultra-bright triple-sided LED technology.
Solar Power Collection
20W high-efficiency monocrystalline panel
Superior low-light charging performance
Advanced photovoltaic cell technology
Position the separate panel in direct sunlight using its 5m cable
Weather-optimised energy harvesting
Energy Storage
Massive 20,000mAh LiFePO4 battery
Extended capacity for long runtime
Winter runtime depends on sunlight and lighting demand
Lower brightness helps conserve stored charge
Consistent night-time illumination
Intelligent Operation
Automatic dusk-to-dawn activation
Integrated light sensor
Seamless operation
Seasonal performance optimisation
Remote-adjustable settings
Advanced Motion Detection
Dual PIR motion sensors
Remote PIR sensor links wirelessly up to 100ft (30m) from the main light
Movement at the remote sensor location can trigger the main light
Minimised false triggers
Reliable activation system
Powerful LED Lighting
210 ultra-bright LED chips
Up to 4000 lumens in motion mode; 2000 lumens in steady-light mode
Triple-sided LED layout for 180° beam
Energy-efficient operation
Wide, even light distribution
Performance Specifications
Dim standby helps conserve battery charge
Steady-light timer: 2 to 12 hours; runtime depends on charge and settings
At full 4000-lumen output the LiFePO4 20,000mAh battery delivers 12+ hours, and dim standby mode extends this to 20+ hours. Winter runtime depends on how much direct sunlight the 20W panel receives — for reliable year-round performance, face the panel due south at roughly 45° and keep it clear of shade so it can reach the ~5-hour full charge.
How big an area can it actually cover?
The triple-sided LED head throws 4000 lumens across a 180° beam and illuminates up to 3000 sq ft. Motion detection reaches up to 100ft (30m) per sensor — the two built-in PIRs give 180° on the light head, and the separate remote PIR sensor extends combined detection to around 240°, useful for L-shaped yards or driveways where one sensor can't see everything.
Can I leave it outside all year in UK weather?
Yes — it carries an IP65 rating against rain and is built to operate from -20°C up to 50°C, well beyond typical UK extremes. For best winter charging, the 20W monocrystalline panel and the mini panel on the remote PIR sensor should both face south with clear sky access. Keep panels free of leaves, snow and debris so the battery still gets its ~5-hour charge on bright days.
Сonsultation
If you have questions, please ask, do not hesitate,we are always happy to help you
