A pack of 5 warm white E27 LED festoon bulbs for FestoonPro 240V belts. Each bulb uses 2 watts and gives 61 lumens of 3000K warm white light. A 10-socket E27 FestoonPro belt takes 2 packs (15 sockets: 3 packs; 20 sockets: 4 packs). These bulbs are not dimmable.
Warm White E27 LED Festoon Bulbs, 5 Per Pack, For 240V Belt & Harness Lighting.
Each bulb has 4 super bright SMD LEDs inside a shatterproof 45 x 68 mm globe, giving a warm, even glow with a 300° beam angle.
A Warm Glow For Just 2 Watts
Every bulb is rated at only 2 watts, so a full belt stays light on power. Replacing old filament bulbs with LEDs will save you money on both electricity and maintenance. Each bulb has a rated lifetime of 20,000 hours.
5 bulbs per pack
One 10-socket E27 FestoonPro belt takes 2 packs
2W per bulb, 4 SMD LEDs
61 lumens per bulb, 3000K warm white
45 x 68 mm shatterproof globe
Not dimmable
How Many Packs Do I Need?
Order one bulb for every socket on your festoon belt or harness. This pack holds 5 bulbs. Our E27 FestoonPro belts come with 10, 15 or 20 sockets, so a 10-socket belt needs 2 packs, a 15-socket belt 3 and a 20-socket belt 4.
Please note:
Although these bulbs can be used in festoon belts / harnesses not supplied by us, we advise you to check a sample, or with the manufacturer, for suitability prior to purchase or installation.
It is vital your festoon belt / harness socket has a weatherproof seal, which covers a minimum of 10mm of the globe part and forms a strong seal above the lamp base. Water damaged bulbs will not be replaced under warranty.
This listing is for a pack of 5 bulbs.
Please note: these bulbs are not dimmable and are not compatible with the dimmer controller.
Please note: screw one bulb into each socket. A 10-socket E27 FestoonPro belt takes 2 packs of 5. The socket's weatherproof seal must cover a minimum of 10mm of the globe and seal firmly above the lamp base. Water damaged bulbs will not be replaced under warranty.
These bulbs screw into the E27 sockets of our 240V mains-powered FestoonPro belts. Each pack holds 5 bulbs, and a 10-socket belt takes 2 packs. The belt and power source are purchased separately.