Great Value Pond Pump and Filter Set - Pond Creator 6000
Buy Pond Pump and Filter Set, PondCreator 6000 Simple Set Up Pond Pump & Filter, Fantastic Spin Clean Filter, Best Prices, Great Reviews, Free UK Delivery
The Pond Creator 6000 Pump & Filter Set contains the UltraFlow 3600 filter pump & pushes water through to the Amazing SpinClean 6000 Pond Filter.
Pump, Filter & Tubing Everything you Need to Start Filtering Your Pond
Everything you need to start filtering is included a generous 5 m length of strong 25 mm pond hose & clips to join the pump to the filter.
Also included are hose clips with easy-tighten butterfly handles. This means that you have everything you need to power a pond up to 6000 litres (1585 gallons)
Pond Filter includes an 11 Watt UVC to prevent your pond water going green
Filter your Pond Water the Easy Way
No need to take the lid off on this filter - Simply turn the external handle to agitate the internal sponges, this super easy-clean feature reduces the frequency of a full clean.
Clever waste indicator pops up when sponges need cleaning to let you know when sponges need a main clean
Rate this product
100%
5/5
(1) Reviews
Please rate this product, describe its advantages and disadvantages, please share your impression about its use
Ultraflow 3600 Filter Pump
Tool Free Access to Impeller
Dimensions (L x W x H): 25 x 18 x 11.5 cm
Hosetail: 25 / 32 / 38 / 40 mm
Max Flow Rate (lph): 3600
Max Solids : 6 mm
Function: Dry Run Protection, Dry Mount Function
Power Cable Length (m): 10
Watts : 20
Max Head Height (m): 2.8
Filter:
SpinClean 6000 Pressurised Pond Filter
Size : H : 41 X W : 38 cm
Filter Inlet : 20 / 25 / 32 mm
Hosetail: 20, 25, 32, 40 mm
Watts: 11
Max Flow - 6000 lph
Power Cable Length (m): 5
- Simply screw the supplied stepped hosetail onto the Ultraflow 3600 filter pump outlet and connect the pond hose,
this will then be connected to the filter at the other end
- The hose attached to the pump outlet needs to be connected to the filter inlet hosetail.
- The waste filter outlet should be attached to a hose which is positioned to a flower bed or drain
as this will drain away dirty water during a back flush (quick interval cleaning).
- The last hosetail; the outlet allows the cleaned water to re-enter the pond. This can either be straight to the main pond via a hose or a waterfall.
Your pond pump and UVC filter are powered by electricity, meaning they need to be connected to the mains supply.
Special care must be taken during this part of the installation process and we recommend consulting an electrician to acquire assistance.
For maximum flow performance (reduced friction loss) it is recommended that the lowest unused section of all pump and filter hosetails be removed if possible.
The Pond Creator 6000 provides Solid and UV filtration, the water is drawn in from the pump to be separated from any debris (Up to 6 mm).
The water is then pumped through to the filter where media is used to filter and clean the water additionally a UV light (11 watt) is used to further clean the water
Preventing it from turning green, therefore providing healthy clean water back in to Your Pond.
WOW, there is not enough room to praise this beauty here, it is just the bees knees, 5000lts from 25mm vis to 950mm vis in three weeks. Thanks Nathan. Tried to upload image but too big for the review