Ultraflow 3600 Filter Pump
Tool Free Access to Impeller
Dimensions (L x W x H): 25 x 18 x 11.5 cm
Hosetail: 25 / 32 / 38 / 40 mm
Max Flow Rate (lph): 3600
Max Solids : 6 mm
Function: Dry Run Protection, Dry Mount Function
Power Cable Length (m): 10
Watts : 20
Max Head Height (m): 2.8
SpinClean 6000 Pressurised Pond Filter
Size : H : 41 X W : 38 cm
Filter Inlet : 20 / 25 / 32 mm
Hosetail: 20, 25, 32, 40 mm
Max Flow - 6000 lph
Power Cable Length (m): 5
- Simply screw the supplied stepped hosetail onto the Ultraflow 3600 filter pump outlet and connect the pond hose,
this will then be connected to the filter at the other end
- The hose attached to the pump outlet needs to be connected to the filter inlet hosetail.
- The waste filter outlet should be attached to a hose which is positioned to a flower bed or drain
as this will drain away dirty water during a back flush (quick interval cleaning).
- The last hosetail; the outlet allows the cleaned water to re-enter the pond. This can either be straight to the main pond via a hose or a waterfall.
Your pond pump and UVC filter are powered by electricity, meaning they need to be connected to the mains supply.
Special care must be taken during this part of the installation process and we recommend consulting an electrician to acquire assistance.
For maximum flow performance (reduced friction loss) it is recommended that the lowest unused section of all pump and filter hosetails be removed if possible.