EasyPond 4500 Pump and Filter Set

Out of stock
RRP: £239.99 Special Price £124.99
  • Buy 2 for £123.49 each and save 1%
Overview
  • please see the latest version : Pond Creator 4500
  • Can Handle Solid Particles Up To 5mm
  • FlowMaster 3500 - Max flow 3500 litres per hour.
  • Pump includes a free fountain kit
  • Includes Filter Media and a 7 watt UVC
  • Easy-Clean Backwash Facility
  • Super Value For money
  • Easy to set up
Overview
  • please see the latest version : Pond Creator 4500
  • Can Handle Solid Particles Up To 5mm
  • FlowMaster 3500 - Max flow 3500 litres per hour.
  • Pump includes a free fountain kit
  • Includes Filter Media and a 7 watt UVC
  • Easy-Clean Backwash Facility
  • Super Value For money
  • Easy to set up

EasyPond 4500 Pump and Filter Set - Super Value Pond Pump & Pond Filter Set

Buy Now EasyPond 4500 Pump and Filter Set and get Everything You Need to power a Pond Up To 4500 litres (1000 gallons) Free UK Delivery

EasyPond 4500 Pump and Filter Set is powered by the FlowMaster 3500 pond pump that has a strong impeller that can handle solids up to 5mm in size. It has a maximum flow rate of 3500 litres per hour. This means that the pump can push through dirty water 24/7 without clogging and with little maintenance.

The Pump includes a free fountain kit - if you want to create a fountain display simply cover the impeller with the secondary strainer (supplied) to prevent solid matter being sucked up then attach the supplied fountain pieces. It is possible to run a fountain and divert water to the filter at the same time

The dirty water is pushed into the EasyFilter 4500. This is a pressurised pond filter meaning that the water enters the filter under pressure from the pump then leaves under pressure - the benefits being that the filter can be positioned below the top of your waterfall (if you are thinking of running one) or even buried up to it's lid. This means the filter can be hiodden in the garden landscape.

Conveniently this set also includes a 5m length of 25mm hose to join the pump to the filter.

Also included are hose clips with easy-tighten butterfly handles. This means that you have everything you need to power a pond up to 4500 Litres (1000 gallons)

Pond Filter includes filter media and a 7 watt UVC to prevent your pond water going green

No need to take the lid off on this filter - simply move the rocker switch from 'clean' to 'waste' and the pump water switches direction creating a backwash to flush debris to waste

Pop-up cleaning indicator lets you know when sponges need a main clean

Rate this product
0/5
0 Reviews

Please rate this product, describe its advantages and disadvantages, please share your impression about its use

Create a review
Max . Pond Size 4500 liters
Max Flow 3500 lph
Max Solids 5 mm
Power Source Mains Powered
Running Costs: 75 watts
Rate this product
0/5
0 Reviews

Please rate this product, describe its advantages and disadvantages, please share your impression about its use

Create a review

FlowMaster Pump

The FlowMaster 3500 is provided with a secondary strainer cage attached. This provides a filter/guard to prevent debris from entering the pump unit; this sits in front of your pump’s impeller.

It is important that this secondary cage should be affixed whilst using the fountain attachment as this will prevent small particles from entering the pump and clogging up the fountainhead.

The fountain attachment is not an essential fitment unless you intend have a fountain running and the majority of our customers use this pump for filtering only. In this case you should follow the instructions below:

Using The Pump to Power The Filter Only

- Unpack all components carefully.
- Unscrew the screw to the lower rear of the pump; this holds the single cage fitment.
- Depress the four retaining clips to the outer of the pump and this will allow you to separate the outer pump housing and allow access to the pump.
- Simply twist and pull the mesh cage off the front of the pump (and store for safekeeping).
- Once you have removed the pump housing clip the cage lid back into position and secure with the housing screw.
- In order to continue with the set up of the pump please fit the supplied multi-stage hosetail (ensuring rubber washer is pushed into the thread).
- This can then be cut down to fit the relevant hose size, i.e. 25x32 or 40mm.

Using The Pump to Power a Fountain AND Filter

If you wish to use both functions of the Flowmaster pump simultaneously you will need to set up in preparation for both.

The fountain kit is supplied in this box and can be set up first as per the enclosed instructions. Once assembled the fountain can be threaded to the outlet marked to the pump cage. A selection of fountain heads are provided to create a range of effects an can be changed at will.

To enable the pump to flow to a filter there also needs to be a flexible hose attached to the 25mm outlet positioned on the side of the T' piece. The flow regulator to the side of this T' piece allows you to adjust the flow to the fountain piece and/or the main pump unit to allow filtration.

Your pond pump and UVC filter are powered by electricity, meaning they need to be connected to the mains supply. Special care must be taken during this part of the installation process and we recommend consulting an electrician to acquire assistance.

For maximum flow performance (reduced friction loss) it is recommended that the lowest unused section of all pump and filter hosetails be removed if possible.

The EasyPond 4500 Pump and Filter Set provides UV, media and biological filtration which allows the water drawn in form the pump to be separated from any debris; therefore providing cleaner water back in to the pond.

No Questions
Сonsultation
If you have questions, please ask, do not hesitate,we are always happy to help you
Click to Ask a Question

Ask Question About

We found other products you might like!