Solar Pond Oxygenator Dual Stone | DualAir ®

Rating:
100 % of 100
In stock
RRP: £49.95 Special Price £34.99
-
+

Order within:
00Hours 00Minutes 00Seconds
Want it Sooner? see delivery options
Overview
  • Solar Pond Oxygenator Dual Stone | DualAir ®
  • Brushless Pump Gives Greater Reliability
  • 2.5 Watt High Grade Solar Panel
  • Large Production of Air : 500 mmHg
  • Extremely Reliable Output >3LPM
  • Oxygenates Small to Medium Ponds
  • Works in Direct Sunlight
Overview
  • Solar Pond Oxygenator Dual Stone | DualAir ®
  • Brushless Pump Gives Greater Reliability
  • 2.5 Watt High Grade Solar Panel
  • Large Production of Air : 500 mmHg
  • Extremely Reliable Output >3LPM
  • Oxygenates Small to Medium Ponds
  • Works in Direct Sunlight

Solar Pond Oxygenator Great Performing Brushless Dual Stone Air Pump

Solar Pond Oxygenator Dual Stone Oxygenates Water, Smart Dual Brushless Solar Air Pump, for larger Ponds, Ideal with a Solar Water Feature / Fountain

Every bit as good as our best selling single stone solar oxygenator but increased power, this oxygenates larger ponds, or ponds that have quite a few small fish.

Spread the Oxygen around with a Dual Stone Oxygenator

If your Pond is larger than 6 feet then this Solar Pond Oxygenator is Ideal, the two stones are separated so can be placed in different locations, optimising the spread of Oxygen through out your pond

Rate this product
100%
5/5
(7) Reviews

Please rate this product, describe its advantages and disadvantages, please share your impression about its use

Create a review
Solar panel 2.5 Wp
Nominal voltage: 5.76 V
Nominal current: 434mA
Safety class: IP 44
Max. air pressure: 500 mmHg
Cable length: 3 m
Flow rate: max. >3 LPM
Operating voltage: DC 8V
Operation: Spring / Summer
Tube Length: 2M * 2
Hose length: 2 m
Power Source Solar
Rate this product
100%
5/5
(7) Reviews

Please rate this product, describe its advantages and disadvantages, please share your impression about its use

Create a review

- Roll out the air hose as well as the connection cable on the oxygenator.
- Fit the hose to the connector of the spring stone.
- Connect the other end of the hose to the air outlet of the oxygenator.
- Place the oxygenator on a dry and safe place near the pond. The place to hold the oxygenator should be higher than the water level to prevent the water from flowing back into the oxygenator through the hose when it is not in operation.
- Put the two pieces of the ground spike together and mount it on the back of the solar module with the gland nut.
- Mount the solar module in a sunny place, adjust the angle let the solar module facing SOUTH toward mid day sun.
- Insert the plug of the oxygenator to the socket of the solar module and screw the cap tightly.

Note:
Don’t dip the oxygenator in water, it is not waterproof.
The oxygenator sucks in the air from the four rectangle orifices on the bottom . Please make sure the air passage is not blocked.

1) The system is designed for oxygenating the water to create a healthy environment in any outdoor water body that keeps fish, such as outdoor aquarium, garden pond and garden water feature.

2) The oxygenator is powered by a solar panel. In order to make it work by solar energy, the solar panel needs to be placed in the sunlight with its solar cells facing the sun as much as possible.

3) The performance of the oxygenator depends on the sunlight intensity and the incident angle at which sunlight strikes the panel surface.

4) There is no On/Off switch available to start and stop the oxygenator. Whenever the oxygenator and the solar module are connected to each other, the oxygenator operates provided there is enough sunshine.

No Questions
Сonsultation
If you have questions, please ask, do not hesitate,we are always happy to help you
Click to Ask a Question

Ask Question About

We found other products you might like!